How do I upgrade the firmware on my router? Step 1: Download the latest firmware for your DIR Series router at http://www.dlink.com Step 2: Once you´ve downloaded the firmware, open a web browser such as Internet Explorer and enter http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar.
Once the upgrade has finished the unit will reboot. Oncethe unit has been rebooted and you are logged in go to Tools andupdate gateway. The current firmware version should now show thenew version of the firmware. Step 8. The router may need to be factory resetbefore use. Disconnect the power to the router, then plug it backin and wait 20 seconds.
Click on Browse, browse to andselect the file that you saved before, then click on Update Firmware or Firmware. The router will then copy the new firmware into its memory andperform the update, after which it will reboot. This will takeapproximately three minutes. 2091 people found this useful.
Step 1: Download the new firmware file from your local D-Link technical support site, or http://www.dlink.com. This file should be saved to the local storage of the computer you are using to perform the upgrade. Step 2: Make sure your computer or mobile device is connected to the DIR-505 by Wi-Fi.
Step 1: Download the latest firmware for your DIR Series router at http://www.dlink.com. Step 2: Once you´ve downloaded the firmware, open a web browser such as Internet Explorer and enter: http://dlinkrouter or http://dlinkrouter.local or http://192.168.0.1 into the address bar. Step 3: The default username is Admin and the password is blank ...
Make sure your device is connected to your router with an Ethernet cable for the upgrade process; do not use a wireless connection when upgrading the firmware. Also, make sure you use a computer connected to the same router as your device ; do not perform this process through a remote connection to your device over the Internet.
Q: How do I upgrade the firmware on my router? A: Important Note: D-Link Suggests only upgrading the firmware over a WIRED connection. Performing the upgrade over a wireless connection may damage the router in the event of a connection drop during the upgrade process.
· Can't find a specific setup video? Let us know what you are looking for and we will do our best to get it uploaded. Leave your suggestions below.
Under Firmware Upgrade click on the Browse… button and locate the.bin file you downloaded in Step 1. Highlight the file by clicking on it once and then click Open. Step 5: Click on Upload to commence the firmware upgrade process. It may take up to one to two minutes for the upgrade to complete.
Click on System Tools-Firmware Upgrade (or Firmware); click on Browse/Choose File to find the extracted firmware file and click open. Step 5 Click the Upgrade button. The device will reboot automatically after the upgrade has been finished.
All that you do, do with all your might--Things done by half are never quite right.